Removing a 3.5-inch Hard Drive

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: Mixing SATA and SAS hard drives on the 2.5 and 3.5-inch hard drive board is not supported.

1Remove the sled from the system. See "Sled Configuration" on page 61.

2Remove the hard drive bracket screws from underneath the sled.

72

Installing System Components

Page 72
Image 72
Dell C5220 owner manual Removing a 3.5-inch Hard Drive