Removing a Memory Module
WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.
1Remove the sled from the system. See "Sled Configuration" on page 61.
2Push the locking latches of the DIMM slot outwards. See Figure
3Remove the memory module from the system.
Figure 3-5. Removing and Installing a Memory Module
| 1 |
|
| 2 |
|
| 3 |
|
1 | locking latch | 2 DIMM slot |
3 | memory module notch |
|
Installing System Components
67
