Installing a SAS Mezzanine Card with 2.5" HDD

Prior to installing a mezzanine card, you must first remove the sled board from the chassis, see "Removing a Sled" on page 62.

1Remove the mezzanine card from its static-proof packing.

2With the PCIe connector facing up, attach the 2.5-inch SAS cable to the SAS mezzanine card.

3Place the mezzanine card in the mezzanine bracket.

4Secure the card on the bracket with the provided screws.

5Insert the linking board into the mezzanine card as shown in the following image.

6Secure the linking board to the bracket with the provided screw.

Figure 3-16. Inserting a Linking Board in a SAS Mezzanine Card

6

5

2

3

4

 

7Flip the mezzanine assembly over and align over the two guide pins on the sled, see following image.

Installing System Components

91

Page 91
Image 91
Dell C5220 owner manual Installing a SAS Mezzanine Card with 2.5 HDD, Inserting a Linking Board in a SAS Mezzanine Card