Installing a 2.5-inch Hard Drive Board
1Holding the board by the edges, place the hard drive board into the sled and connect to the system board .
2Replace the eight screws to secure it in place .
3Connect the four SATA cables between the hard drive board and the system board.
|
|
|
| HDD3 | SATA3 | |
|
|
|
| HDD2 | ||
|
|
|
| SATA2 | ||
2.5” HDD | 2.5” HDD | 2.5” HDD | 2.5” HDD | HDD1 | ||
| ||||||
HDD0 | HDD1 | HDD2 | HDD3 | HDD0 | SATA1 | |
|
|
|
|
| SATA0 |
Removing a 3.5-inch Hard Drive Board
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Remove the hard drives. See "Removing a
2Remove the eight screws from the hard drive board .
3Disconnect the hard drive board from the system board and lift out of the sled.
Installing System Components
77
