Gen2, Auto | Dell C5220 manual

Menu Fields	Settings	Comments

PCI Slot Configuration		Disable if PCIe card is not
		installed.
		NOTE: Function supported
		after BIOS 2.0.X.

PCIe Generation	Gen2*	Set PCIe generation.
	Gen1	NOTE: Function supported
		after BIOS 2.0.X.

VT for Direct I/O	Disable*
	Enable

Disable/Enable Intel Virtualization Technology for Direct I/O (VT-d) that enhances I/O support (DMA) when running a Virtual Machine Monitor.

SR-IOV Global Enable	Disable*
	Enable

Disable/Enable BIOS support for SR-IOV devices. To enable this feature, an add-on NIC with SR-IOV support is required.

Maximum Payload Size	Auto*	Auto detects the PCIe
	128 Bytes	maximum payload size or
	128 Bytes	sets it to 128/256 Bytes.
	256 Bytes	sets it to 128/256 Bytes.
	256 Bytes

WHEA Support	Disable*	Enable or disable Windows
	Enable	Hardware Error
	Enable	Architecture (WHEA).
		Architecture (WHEA).

Using the System Setup Program

35

Image 35

Dell C5220 owner manual Gen2, Auto

Contents

Dell PowerEdge C5220 Systems Regulatory Model B04S Important Information Page Contents 119 111 About Your System Features Front-Panel Features and Indicators Feature Description Feature Status Description Indicators Feature Status Description About Your System About Your System About Your System About Your System About Your System Start Menu Using the System Setup Program Console Redirection Bios Setup Options at BootEnable/Disable Console Redirection Key Ansi Escape Sequence Other Sequences Configuring Special Keys General Help Conventions Server Platform Setup Utility Screens Main Main Menu Displays the processor type Advanced Advanced Menu Power Management State CPU ConfigurationAdvanced\CPU Configuration All DisabledEnabled Prefetch Configuration Enable Advanced\CPU Configuration\Prefetch Configuration Auto Memory ConfigurationAdvanced\Memory Configuration Disable Advanced\SATA Configuration Sata Configuration Drive Port Mapping of Cougar Point Sata Controllers Onboard PCI ConfigurationAdvanced\PCI Configuration Gen2 Embedded Network Devices Advanced\PCI Configuration\Embedded Network DevicesEnabled with PXE Enabled without PXE Active State Power Management Configuration L0s & L1 Advanced\PCI Configuration\PCI Slot Configuration PCI Slot Configuration Advanced\USB Configuration USB Configuration USB Port with BMC Disabled Server Management Server Management Menu Fields Settings Comments Server Management/BMC Network Configuration Set BMC LAN Configuration IP Address Xxx.xxx.xxx.xxx Enter IP address Form Server/Remote Access Configuration Remote Access Configuration Post View System Event Log Using the System Setup Program Boot Boot Menu Bios Security Security Menu Save & Exit Save and Exit CD/DVD ROM Status Codes Post Error HandlingError Messages Status Codes Status Code Description Command Line Interfaces for Setup options Recommended Tools Safety Measures Inside the System Inside the System PowerEdge C5220 8-Sled SKU Sled Configuration Removing a Sled Sleds Installing a Sled Dimm Population Rules Supported Dimm ConfigurationMemory Modules Supported Memory Supported Memory DDR3 ECC VLP Removing a Memory Module Removing and Installing a Memory Module Replacing a Memory Module Removing a 2.5-inch Hard Drive Hard Drives HDD2 HDD3 Installing a 2.5-inch Hard Drive Removing a 3.5-inch Hard Drive Remove the hard drive cables from the cable clips Installing a 3.5-inch Hard Drive Insert the hard drive cables into the cable clips Removing a 2.5-inch Hard Drive Board Hard Drive Boards Removing a 3.5-inch Hard Drive Board Installing a 2.5-inch Hard Drive Board Installing a 3.5-inch Hard Drive Board Removing a Heat Sink/Shroud Heat Sinks Removing a heat sink/shroud Installing a heat sink/shroud Installing a Heat Sink/Shroud Final installed view of a heat sink/shroud Removing a heat sink Removing a Heat Sink 10. Installing a heat sink Installing a Heat Sink Removing a Processor Processors Installing a Processor Replacing a Mezzanine Card Optional Installing a 1 GbE and 10 GbE Mezzanine CardMezzanine Cards 11. Installing a Linking Board in a Mezzanine Card Removing a 1 GbE and 10 GbE Mezzanine Card 13. Securing a Mezzanine Assembly Remove the card from the assembly 16. Inserting a Linking Board in a SAS Mezzanine Card Installing a SAS Mezzanine Card with 2.5 HDD 17. Installing a SAS Mezzanine Assembly in a Sled Removing a SAS Mezzanine Card with 2.5 HDD Routing the 2.5 SAS Mezzanine Cables 19. Removing a SAS Mezzanine Assembly in a Sled 20. Removing a SAS Mezzanine Card Installing a SAS Mezzanine Card with 3.5 HDD 21. Inserting a Linking Board on a 3.5 SAS Mezzanine Card SAS Cable Identification Routing the 3.5 SAS Mezzanine CablesRemoving a SAS Mezzanine Card with 3.5 HDD 24 .5 SAS Cable SAS Cable System Does Not Boot After Initial Installation Troubleshooting SequenceServer Boot Issues Product Family 100 101 102 System Does Not Boot After Configuration Changes 103 Installation Problems Firmware Recovery Utility-SOCFLASH Utility Update UtilitiesTroubleshooting External Connections BMC Firmware Update 105 106 Updates Through TFTP/HTTP/FTP 107 108 Bios Recovery Flow Bios System UpdateBios Recovery Mode Firmware Update Utility-AMI Flash Utility 110 111 System Board Jumpers and Connectors JP5 112 113 Inch Hard Drive Board Connectors 114 Backplane ConnectorsSled Backplane Front Connectors 115 Sled Backplane Back Connectors 116 6shows the 12-sled backplane front connectors 117 Power Distribution Board Connectors 118 PDB Power and SMBus Connectors 119 Contacting Dell 120 121 Index 122 123 124