Dell C5220 owner manual Post

Menu Fields	Settings	Comments
Serial Port Number	COM1	Serial port number
	COM2 as SOL*
Serial Port Address	3F8h/2F8h*	COM1/COM2 IO port
	2F8h/3F8h	address
Flow Control	None*	Flow control can prevent
	Hardware	data loss from buffer
		overflow. When sending
		data, if the receiving
		buffers are full, a 'stop'
		signal can be sent to stop
		the data flow. Once the
		buffers are empty, a 'start'
		signal can be sent to re-
		start the flow. Hardware
		flow control uses two wires
		to send start/stop signals.
Redirection After BIOS	Disabled	Redirection After BIOS
POST	Always*	POST
Terminal Type	ANSI*	Emulation: ANSI:
	VT100	Extended ASCII char set.
		VT100: ASCII char set.
	VT-UTF8
		VT-UTF8: Uses UTF8
		encoding to map Unicode
		chars onto 1 or more bytes.
VT-UTF8 Combo Key	Disabled	Enable VT-UTF8
Support	Enabled*	combination key support
		for ANSI/VT100 terminals.

NOTE: BIOS setup screens display at 100 (columns) x 31 (lines). Change the client-side console utility settings to support 100 (columns) x 31 (lines) for accurate screen display.

Using the System Setup Program

47