Figure 3-21. Inserting a Linking Board on a 3.5" SAS Mezzanine Card
5
6
7
5
4
2
8Flip the mezzanine assembly over and align over the two guide pins on the sled, see following image.
9Align the linking board over the sled and insert.
10Secure the assembly to the sled with the three screws.
Figure 3-22. Installing a SAS Mezzanine Assembly in a Sled
10 
9
10
8
8 10 
NOTE: The I/O screw bracket tab must be behind the mezzanine bracket.
96
Installing System Components
