Dell C5220 owner manual Heat Sinks, Removing a Heat Sink/Shroud

Heat Sinks

The following procedure as illustrated with an air shroud only applies to the 12-sled SKU system(Table 3-1). The 8-sled SKU does not require an air shroud.

Table 3-1. Processors Requiring an Air Shroud on C5220 12-Sled SKU

SeriesProcessor

Intel Xeon E3-1200v2 product family

Intel Xeon E3-1280v2

Intel Xeon E3-1270v2

Intel Xeon E3-1240v2

Intel Xeon E3-1230v2

Intel Xeon E3-1220v2

Removing a Heat Sink/Shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Remove the required sled from the system. See "Sled Configuration" on page 61.

2Loosen the four captive screws on the heat sink .

Installing System Components

79