Routing the 2.5" SAS Mezzanine Cables

After installing a mezzanine card, you need to route the SAS cabling as depicted in the following figure.

Figure 3-18. SAS Mezzanine Cable Routing

hard drive ports

routing path

Removing a SAS Mezzanine Card with 2.5" HDD

Prior to removing a mezzanine card, you must first remove the sled board from the chassis, see "Removing a Sled" on page 62.

1Remove the screws securing the assembly.

2Remove the assembly from the sled.

Installing System Components

93

Page 93
Image 93
Dell C5220 owner manual Routing the 2.5 SAS Mezzanine Cables, Removing a SAS Mezzanine Card with 2.5 HDD