HP 9100 manual Computer Setup-Main, 1Computer Setup F10 Utility Main Menu

●Power

●Exit

Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc.

4.To apply and save changes, press the F10 key.

If you have made changes that you do not want applied, press the F5 key to return to the default values.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.

Table 5-1Computer Setup (F10) Utility Main Menu

Heading	Table
Main	Computer Setup—Main on page 40
Advanced	Computer Setup—Advanced on page 41
Boot	Computer Setup—Boot on page 43
Power	Computer Setup—Power on page 42
Exit	Computer Setup—Exit on page 44

Computer Setup—Main

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 5-2Computer Setup—Main

Option	Description
System Time	Allows you to set system time.
System Date	Allows you to set system date.
Language	Allows you to select language.
Floppy Diskette A:	Allows you to set drive A to:
	●	Disabled
	●	1.44 MB 3.5”
	●	Not Installed

40 Chapter 5 Computer Setup (F10) Utility