![](/images/new-backgrounds/1213137/21313793x1.webp)
Table 5-2 Computer Setup—Main (continued)
1st Drive | For each, allows you to: | ||
2nd Drive | ● | Port Configuration (disable/enable) | |
| ● | (view only) | |
|
| ◦ | Capacity (Size - HDD only) |
|
| ◦ | Transfer Mode |
| ● Smart Support - run HDD | ||
|
| ◦ | SMART Status Check |
|
| ◦ | SMART Short |
|
| ◦ | SMART Extended |
|
| ||
System Information | (view only) | ||
| ● | Installed Memory | |
| ● | Memory Bank 1 | |
| ● | Memory Bank 2 | |
| ● | BIOS Revision | |
| ● | Core Version | |
| ● | Product Number | |
| ● | Model Number | |
| ● Serial Number (press Enter to change) | ||
| ● Asset Tag (press Enter to change) | ||
|
|
|
|
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 5-3 Computer Setup—Advanced
Option | Description | |
|
| |
CPU Type | (view only) | |
|
| |
CPU Speed | (view only) | |
|
| |
Cache RAM | (view only) | |
|
| |
SATA1 Controller | Allows you to disable/enable the SATA Controller. | |
|
| |
SATA Controller Mode | If SATA1 Controller is enabled, allows you to set the mode to: | |
| ● | IDE |
| ● | AHCI |
|
| |
USB Ports | Allows you to enable/disable individual USB ports (USB Port 1 through USB Port 7). | |
|
|
|
Computer Setup (F10) Utilities 41