HP 9100 manual Computer Setup-Boot, S5 Maximum Power

Table 5-4Computer Setup—Power (continued)

S5 Maximum Power	Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
Savings	system as much as possible in the S5 state. This feature must be disabled if you want to enable
	Wake on LAN from S5.
WOL in S5	Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
	during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
	order to enable limited Wake on LAN from S5.

Computer Setup—Boot

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 5-5Computer Setup—Boot

Option	Description
Boot-time Diagnostic	Disables/enables POST diagnostic messages display.
Screen
Esc: Boot Menu	Disables/enables POST Esc: Boot Menu message display,
F9: Diagnostics	Disables/enables POST F9: Diagnostics message display,
F10: Setup	Disables/enables POST F10: Setup message display,
F11: Recovery	Disables/enables POST F11: Recovery message display,
F12: Boot From LAN	Disables/enables POST F12: Boot From LAN message display,
(Boot Device Priority)	Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
1st Boot Device	of the four:
	● CD-ROM Group
2nd Boot Device
	●	HDD Group
3rd Boot Device
	●	Floppy Group
4th Boot Device
	●	Network Boot Group
	NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
	system has started.
Floppy Group Boot	Specifies boot device priority within removable devices.
Priority
CD-ROM Group Boot	Specifies boot device priority within CD/DVD drives.
Priority
HDD Group Boot	Specifies boot device priority within hard drives.
Priority
Network Group Boot	Specifies boot device priority within bootable network devices.
Priority

Computer Setup (F10) Utilities 43