3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 Viewing and Configuring ACLs

Viewing and Configuring ACLs 229

4Select the mapping type:

„To map to a physical port, select port and go to step 5.

„To map to a virtual port, select vport and go to step 6.

„To map to a VLAN, select vlan and go to step 7.

„To map to a Distributed MAP, select dap and go to step 8.

5To map an ACL to a port:

aIn the Port list, select the port or port group to which you want to map the ACL.

You cannot map an ACL to a MAP port or a wired authentication port.

bIn the Direction list, select In to filter incoming packets or Out to filter outgoing packets.

cClick Finish.

6To map an ACL to a virtual port:

a In the Tag Value box, specify the 802.1Q tag value that identifies a virtual port in a VLAN.

The tag value can be a number from 1 to 4093. The default value is 1.

Make sure that you do not specify duplicate mappings that specify the same port and tag value.

bIn the port list, select the port to which you want to map the ACL. You cannot map an ACL to a MAP port or a wired authentication port.

cIn the Direction list, select In to filter incoming packets or Out to filter outgoing packets.

7To map an ACL to a VLAN:

a In the Type list, select ID to identify the VLAN by number or Name to identify it by name.

„If you selected Name, select or type the VLAN name from the Name drop-down list.

„If you selected ID, select or type the VLAN number in the ID box.

bIn the Direction list, select In to filter incoming packets or Out to filter outgoing packets.

8To map an ACL to a Distributed MAP:

a In the DAP ID list, select the Distributed MAP from the list.