3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual „ Wpa

242CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

Configuring an The 802.1X Service Profile wizard requires you to select one or more 802.1X Wireless RADIUS server groups and does not allow you to complete the

Service configuration without selecting one. To be available for selection in the wizard, a RADIUS server group must already be configured before you open the wizard. (See “Viewing and Configuring RADIUS Settings” on page 298.)

1Access the 802.1X Service Profile wizard:

a In the Organizer panel, click on the plus sign next to the WX switch on which you want to configure the service profile.

b Click on the plus sign next to Wireless. c Select Wireless Services.

d In the Task List panel, select 802.1X Service Profile.

2Read the description of the wizard on the first page, then click Next.

3Edit the service name in the Name box.

Editing the name is optional if this is the first service of this type you are configuring on the switch.

4Type the SSID name in the SSID box.

5Click Next.

6Select the security modes you want the SSID to support. You can select one or more of the following:

„RSN (WPA2)

„WPA

„Dynamic WEP

7Click Next.

8If you selected RSN or WPA in step 6, select the encryption algorithms to use. Otherwise, go to step 11.

„AES (CCMP)—Usually used with RSN (WPA2)

„TKIP—Usually used with WPA

„WEP-104—Used with dynamic WEP

„WEP-40—Used with dynamic WEP

9Click Next.