3Com 3CRWX120695A WXR100, 3CRWXR10095A manual To move an LOS point, To delete an LOS point

106CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

To move an LOS point

To move an LOS icon, click-and-drag to select the icon and move it to its new location.

To temporarily remove an LOS point onto the Objects to Place tab

To temporarily remove an LOS point from the floor without deleting it, click and drag the LOS icon to the Objects To Place area of the Organizer panel.

To move the LOS back onto the floor:

1Click on the LOS in the Objects To Place area of the Organizer panel.

2Move the cursor to the floor location where you want to place the LOS.

3Click to place the LOS.

You cannot delete an LOS point directly from the Objects To Place tab. To delete an LOS point, place the LOS point somewhere on the floor space, then delete it. (See “To delete an LOS point”.)

To delete an LOS point

To permanently remove an LOS icon from the floor:

1Right-click on the LOS icon.

2Select Delete. The Delete Objects wizard appears.

3Click Finish to confirm the deletion.

Generating a Site Survey Order

1Display the floor plan in the Content panel.

2In the Task List panel, click RF Planning.

3Under Site Survey, click Report. The Site Survey Order Generation dialog is displayed.