3Com 3CRWXR10095A, 3CRWX120695A WXR100 „ 0 normal-Packets with normal TOS defined are filtered

Viewing and Configuring ACLs 225

„0 (normal)—Packets with normal TOS defined are filtered.

„1 (minimum monetary cost)—Packets with minimum monetary cost TOS defined are filtered.

„2 (maximum reliability)—Packets with maximum reliability TOS defined are filtered.

„4 (maximum throughput)—Packets with maximum throughput TOS defined are filtered.

„8 (minimum delay)—Packets with minimum delay TOS defined are filtered.

By default, the TOS value is -1 (any).

In addition to these specific values, you can specify a number from 1 to 15 that is the sum of TOS option values. For example, to select minimum delay and maximum throughput as the TOS options, type 12, which is the sum of the two values.

dClick OK.

10Select the action from the Action drop-down list:

„Permit—allows access if the conditions in the ACE are matched

„Deny—refuses access if the conditions in the ACE are matched

11To mark the packet with a CoS value, select the value in the CoS box.

Packet Priority	CoS Value	MAP Forwarding
Desired		Queue Assignment
Background	1 or 2	4
Best effort	0 or 3	3
Video	4 or 5	2
Voice	6 or 7	1

By default, the CoS value is -1 (any).

12Repeat step 3 to step 11 for each ACE.

13To reorder the ACEs, select an ACE and click the up or down arrow to move it.

14Click OK to save the ACL. The ACL appears in the ACL table.