3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 manual Setting Up a Switch

Setting Up a Switch 169

„notify-only—The switch can use the string to send notifications.

„read-write-notify—An SNMP management application using the string can get and set object values on the switch. The switch can use the string to send notifications.

iClick Next.

6Configure VLANs.

VLANs that already exist, such as the default VLAN, are listed. You can modify existing VLANs and create new ones.

To create a VLAN:

a Click Create. The Create VLAN wizard appears.

b See “Viewing and Configuring VLANs” on page 206.

c When you are finished configuring VLANs, click Next and go to step 7.

7Configure RADIUS servers and server groups.

RADIUS servers that are already configured are listed. You can modify existing servers and groups and create new ones.

To create a RADIUS server and place it in a group:

a Click Create. The Create RADIUS Server wizard appears.

b See “Viewing and Configuring RADIUS Settings” on page 298.

c When you are finished configuring RADIUS settings, click Next and go to step 8.

8Configure wireless services.

Wireless services that are already configured are listed. You can modify existing services and create new ones.

To create a wireless service:

a Click Create and select the type of service you want to create:

„802.1X Service Profile—Provides wireless access to 802.1X clients.

„Voice Service Profile—Provides wireless access to Voice over IP (VoIP) devices.

„Web-Portal Service Profile—Provides wireless access to clients who log in using a web page.

„Open Access Service Profile—Provides wireless access to clients without requiring them to log in.