3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual Click Generate

398CHAPTER 15: GENERATING REPORTS

9To prevent 3WXM from replacing an existing report of the same type with this new report, click next to Overwrite Existing Files to deselect this option.

10Click Generate.

11When the report is generated, click the report link to view it.

The report lists the BSSIDs of the rogues detected by each WX switch. The report also shows graphs of the distribution of rogues on the WX switches, and of trend data.

Generating a Site The site survey order contains the locations and MAC addresses of the

Survey Order line-of-site (LOS) points for use when conducting a site survey, and also provides a GIF image of the floor.

For the site survey order to be meaningful, you must specify the line-of-site (LOS) points first. (See “Importing RF Obstacle Data from a Site Survey” on page 98.)

To generate a site survey order

1Select the Reports tool bar option.

2In the Report Category list, select RF Plan Reports.

3In the Reports list, select Site Survey Order.

4Select the scope for the work order. You can select the network plan, a site, a building, or an individual floor.

5Select the language:

„English

„German

6To change the output directory for the report, click on the button next to output directory, navigate to the new directory, and click Select.

7Click Generate.

8When the report is generated, click View. A browser window containing the report opens.

9Optionally, select the floor.

10Click View Site Survey Order. The site survey order appears. LOS point information for the selected floor is displayed.