3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual „ Wpa

Viewing and Configuring Wireless Services 245

The next step depends on the encryption type you selected in step 5:

„If you selected Encrypted, go to step 8.

„If you selected Clear, go to step 18.

8Select the access type:

„802.1X Access—Device is allowed onto the SSID only after successful authentication using 802.1X.

„MAC Access—Device is allowed onto the SSID only if its MAC address matches an entry on a RADIUS server or the switch’s local database.

„Open Access—All devices are allowed onto the SSID.

9Click Next.

10Select the security modes you want the SSID to support. You can select one or more of the following:

„RSN (WPA2)

„WPA

„Static WEP

11Click Next.

12If you selected RSN or WPA in step 10, select the encryption algorithms to use. Otherwise, go to step 16.

„AES (CCMP)—Usually used with RSN (WPA2)

„TKIP—Usually used with WPA

„WEP-104—Used with dynamic WEP

„WEP-40—Used with dynamic WEP

13Click Next.

14If you selected RSN or WPA in step 10, you can select whether to use dynamically generated keys, or static keys based on a passphrase.

„To use dynamically generated keys, leave the Pre-shared Key box blank and go to step 15.

„To use static keys, type a string from 8 to 63 characters long in the Pre-shared Key box and click Generate.

15Click Next.

16If you selected Static WEP in step 12, specify WEP keys. Otherwise, go to step 17.

„For each key (up to four), type the key value in the corresponding key box.