3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A manual Generating RF, Network Design, Information

Generating RF Network Design Information 155

Generating RF	After 3WXM has calculated the number of MAPs required to provide
Network Design	wireless coverage, you can generate a work order report. The work order
Information	report provides all of the necessary information for the physical
	installation of the 3Com Mobility System. A work order shows where the
	MAPs should be installed, WX initial setup configuration information, and
	projected RSSI information that is useful when verifying the installation.
	After deployment, you can generate a work order with the optional RSSI
	projection tables and MAP MAC addresses, and use it for
	post-deployment verification.

To generate a work order report

1Display the floor plan in the Content panel.

2In the Task List panel, click RF Planning.

3Under RF Planning, click Work Order Report. The Work Order Generation dialog is displayed.