3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual Creating a WX Switch, Third-Party AP

	Creating a WX Switch 63
6	In the Available Devices list, select the WX switches you want to add to
	the Mobility Domain.
7	Click Next.
8	Select the switch to act as the seed switch for the Mobility Domain.
9	Click Finish.
Creating a WX
Switch
1	Select the Configuration tool bar option.
2	In the Organizer panel, select the network plan name.
3	In the Task List panel, select Wireless Switch.
4	Go to “Using the Create Wireless Switch Wizard” on page 165.
Creating a	You can add a third-party AP to the network plan’s equipment list.
Third-Party AP

When you use RF Planning, you can place the AP on its location on a floor plan. In this case, 3WXM take the AP’s channel number into account when assigning channels to MAPs.

1Select the Configuration tool bar option.

2Select the network plan in the Organizer panel.

3Select the Third Party AP task in the Task List panel. The Create Third Party AP wizard appears.

4In the Name box, type a name for the access point. You can use 1 to 32 characters, with no punctuation except the following: period (.), hyphen (-), or underscore (_).

5Optionally, in the Manufacturer ID box, type the manufacturer identification for the access point (1 to 30 characters, with no spaces).

6In the Product ID box, type the product identification for the access point (1 to 30 characters, with no spaces).

7In the IP Address box, type the IP address for the access point.

If you specify an IP address, you can use Telnet and a Web browser with this access point.

8In the Telnet Port Number box, specify the port number for Telnet service.