3Com 3CRWX120695A WXR100, 3CRWXR10095A Or for specific instances, To disable or reenable a rule

Resolving an Error or Warning 367

3Com recommends that you do not deploy a network plan that contains configuration errors. Allowing configuration errors to be deployed to the network can affect network stability.

3Click Close to place the changes into effect and close the dialog box.

Disabling and If you disable a rule, you can use the Verification Options dialog box to Reenabling Rules reenable the rule. You also can disable rules, for the entire network plan

or for specific instances.

To disable or reenable a rule

1On the toolbar of the Verification tab click Options. The Verification Options dialog box appears.

2Click Rules Control. The list of 3WXM verification rules appears.

3Locate the rule you want to disable. You can click on the Class or Rule headers to sort alphabetically by rule class or by rule name. You also can filter the display to show only the rules in a specific class.

To filter the rule list based on class:

a Click Filter By Class. The rule list changes to list the rules in the selected class.

b Select a rule class from the listbox. The list of rules changes to list the rules in the selected class. In this example, the selected rule class is 802.1X Network Access.

4In the Enabled column, click on the checkbox next to the rule.

„If you are reenabling a rule, go to step 5.

„If you are disabling a rule, go to step 8.

5In the Rule column, click on the rule name. The disable settings are displayed and become editable.

„If the rule is disabled for all instances, the Disable All Instances option is selected.

„If individual instances of the rule are disabled, the Disable Selected Instances option is selected and the instances are listed. Instances that are disabled have checkmarks in the checkboxes next to them.