3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Click Properties Select Snmp Link Traps

178CHAPTER 6: CONFIGURING WX SYSTEM PARAMETERS

bIn the Organizer panel, click the plus sign next to the WX switch.

cClick the plus sign next to System.

dSelect Ports.

2Select the port.

3Click Properties.

4Select SNMP Link Traps.

5Click OK.

Configuring a Port for A MAP access port directly connects the WX switch to a MAP. The port a Directly Connected also can provide power to the MAP.

AP

A Distributed MAP, which is connected to WX switches through intermediate Layer 2 or Layer 3 networks, does not use a MAP access port. To configure for a Distributed MAP, see “Viewing and Configuring MAPs” on page 272.

1Access the Create AP wizard:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to System.

d Select Ports.

e Select PoE Enabled, if you have not already done so. f In the Task List panel, select AP.

2To change the name, edit the string in the Name field. (The name can contain up to 16 alphanumeric characters, with no spaces or tabs).

3Click Next.

4To change the model, select the model from the AP Model pull-down list.

5To change the radio type, select it from the AP Radio Type drop-down list:

„11a—802.11a

„11b—802.11b only

„11g—802.11b/g

The radio type is configurable on single-radio MAP models. For dual-radio models, the radio type is configurable on the 802.11b/g radio.