3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Data, To complete the connection

496CHAPTER B: CHANGING 3WXM SERVICES PREFERENCES

To complete the connection

1Select one or both of the following options, within 60 seconds after the Certificate Check dialog is displayed:

„Always accept self-signed certificates. — Use this option to configure the 3WXM client to always accept a self-signed certificate from the 3WXM monitoring service and from WX switches.

„Install this certificate to validate future connections. — Use this option to accept the certificate and consider the certificate to be valid for future connections.

	When you use this option, the Certificate Check dialog box is not shown
	again for the certificate, even if the certificate becomes out of date.
2	Click Accept.
	To reject the certificate and refuse the connection, click Reject. The
	3WXM ends the connection.
	The Certificate Check dialog box is redisplayed each time the 3WXM
	client attempts to establish a connection with 3WXM Services.
Verifying that the	If you are using a network plan that already contains equipment, use the
3WXM Client is	following procedure to verify that the 3WXM client is receiving data for
Receiving Service	the equipment.
Data

1Select an object in the Organizer panel, then right-click and select Monitor. The Monitor tab appears in the Content panel.

2Wait 60 seconds for 3WXM to retrieve updates from the server, then check the color of the objects for 3Com equipment displayed in the Explore window.

„If the status color is blue, then 3WXM is not receiving status data from the server yet.

„If the status color is green, yellow, orange, or red, then 3WXM is receiving status data from the server.