3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A manual Changing Service, To change service settings

Changing Service Settings 497

Changing Service	The service settings control the connection parameters, key store
Settings	information, and access control to 3WXM Services.
	The port numbers used by 3WXM Services must not be used by other
	applications on the machine where the 3WXM Services is installed. If port
	443 or 162 is used by another application, change the port number for
	the monitoring service or for the other application.
	To change service settings

1Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog box appears.

2Click the Service Settings tab (if not already selected).

3To change the TCP port on which the 3WXM Services listens for requests from 3WXM, type or select the port number in the HTTPS Server Port box. The default is 443.

CAUTION: When you click Save, all instances of the 3WXM client lose connection with the service and will need to reconnect on the new port number. The HTTPS port number is automatically updated for the 3WXM client you are using and your connection is automatically restored. Other clients will need to use the Monitor Service Select wizard to change the service port and reconnect.

4The change the UDP port on which 3WXM Services listens for SNMP traps, type or select the port number in the HTTPS Server Port box. The default is 162.

5To enable 3WXM Services to receive traps, select one or both of the following trap types:

„SNMP V1 Traps

„SNMP V3 Traps

You also must add 3WXM Services as a notification target on each WX switch. 3WXM Services does not start listening for SNMP notifications from a WX switch until you add 3WXM Services as an SNMP notification target to the switch. (To configure 3WXM Services as a switch’s notification target, see “Configuring a Notification Target” on page 191).

6To enable 3WXM to reuse a switch configuration to replace an old switch with a new one, select Auto-Config IP Subnet Matching.