3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A manual Planning the 3COM Mobility System

146CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

9Click Finish to accept the channel assignments.

The new channel assignments are reflected in the Coverage Areas panel.

10Do one of the following:

„To verify the RF network, see “Verifying the Wireless Network” on page 150.

„Click Finish to save the changes and close the wizard.

For MAPs that are in the network plan but are not yet deployed and managed by 3WXM, the channel number is changed to match the results of channel assignment. However, the channel is not changed for MAPs that are running in the live network and are being managed by 3WXM. For these MAPs, 3WXM displays the channels that are in use on the live MAPs.

To make the MAPs in the live network use the channels assigned by RF Planning, deploy the configuration to the network. After you deploy the configuration with the new channel settings, the channel information on the floor plan should match the channels assigned by RF Planning.

The MAPs on a floor plan in RF Planning are color coded to indicate their monitored status:

„Green—Up