3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Generating a Rogue Summary Report

Generating a Rogue Summary Report 397

Generating a Rogue The rogue summary report lists information about rogues.

Summary Report

The data for this report comes from 3WXM Services. The Enable Rogue

Detection option, located in the Rogue Detection group box of the

Monitoring Settings tab, must be enabled. (See “Changing Monitoring

Settings” on page 500.)

1Select the Reports tool bar option.

2In the Report Category list, select Rogue Reports.

3In the Reports list, select Rogue Summary.

4Select the scope type of the report from the Report Scope Type drop-down list:

„Mobility Domain

„Site

„Building

„Floor

5Select the instance for which you want the report. For example, if the scope is Building, select the building.

6Select the time period for the report:

„1 Hour

„24 Hours

„7 Days

„30 Days

7To specify the rogue type, click on the Value field in the Report Filter area of the dialog, and select one of the following from the drop-down list:

„Rogue

„Interfering

„Ad-hoc

„All (This option displays all three types: rogue, interfering, and ad-hoc.)

The default is Rogue.

8To select or change the output directory for the report, click on the button next to output directory, navigate to the new directory, and click Select.