3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A manual Defining a Color by Changing RGB Properties

488CHAPTER A: CHANGING 3WXM PREFERENCES

5Click OK to accept the color. The RF Planning Options tab in the Preferences dialog box is active.

6Do one of the following:

„Change another color.

„Click another Preferences tab.

„Click Close to close the Preferences dialog box.

Defining a Color by Changing RGB Properties

You can define a color by changing red, blue, and green (RGB) color properties.

1To specify a color by changing RGB, click RGB in the Choose Color dialog box.

2Use the Red, Green, and Blue sliders to define a color. You can see a preview of the color in the Preview box.

3Click OK to accept the color. The RF Planning Options tab in the Preferences dialog box is active.

4Do one of the following:

„Change another color.

„Click another Preferences tab.

„Click Close to close the Preferences dialog box.

Changing 3WXM You can change the severity and type of 3WXM events that are logged.

Logging Options By default, the event logging level is set to Critical, and all events are logged.

These log settings apply to log messages generated by 3WXM. They do not apply to log messages generated by WX switches.

To change 3WXM logging options:

1Select Tools > Preferences. The Preferences dialog box appears.

2Click the Logging tab.