3Com WX4400 3CRWX440095A WX1200 manual Changing, Country Code, Applying, Network’s RF, Auto-Tuning

Changing the Country Code 65

Changing the	The country code determines the valid radio types as well as channel
Country Code	numbers and power settings for MAP radios. The country code is one of
	the parameters you set when you create a network plan. If you need to
	change a plan’s country code, use the following procedure.

1Select the Configuration tool bar option.

2In the Organizer panel, select the network plan name.

3In the Task List panel, select Country Code. The Change Country Code wizard appears.

4Select the country code from the drop-down list.

5Click Next.

3WXM changes the country code on all the WX switches in the network plan, and lists its progress as it does so.

6Click Finish.

Applying the		If RF Auto-Tuning is running on MAP radios in the network, you can
Network’s RF		update the radios in the network plan with the channel and power
Auto-Tuning		settings currently in effect on the same radios in the network. You also
Settings to the		can lock down the channel and power settings in the plan and in the
Network Plan		network by disabling RF Auto-Tuning on the radios.
		RF Auto-Tuning settings are applied only to configured MAPs, not to
		Auto DAPs (Distributed MAPs configured using a Distributed MAP
		profile).
		This option also disables RF Auto-Tuning on the radios. When
		RF Auto-Tuning is disabled, the channel and power settings on the radios
		are static.
	1	Select the Configuration tool bar option.
	2	In the Organizer panel, select the network plan name.
	3	In the Task List panel, select Auto-Tune Settings. The Apply Auto-Tune
		Settings wizard appears.
	4	Select the RF Auto-Tuning settings you want to apply. Both channel and
		power settings are selected by default.