3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual To draw an object, Object Action

Importing or Drawing Floor Details 93

Drawing Floor You can use the Free Draw palette to add objects to your floor drawing Objects Manually that are not related to RF obstacles (for example, a conference room

table).

The tools for drawing non-RF objects work the same as the tools for drawing RF objects, but the tools are different. To draw a non-RF object, use the tools in the Free Draw group box. To draw RF objects, use the tools in the RF Obstacle group box. (See“Drawing RF Obstacles” on page 97.)

To draw an object

1Display the floor plan in the Content panel.

2In the Task List panel, click Tools.

3In the Free Draw area under Layout, click one of the icons and draw the object as described in the following table.

Object	Action
	Diagonally drag the cursor over the area where you
	want the circle to appear.
(circle)
	Diagonally drag the cursor over the area where you
	want the square to appear.
(square)
	1	Click at a vertex, and drag the cursor to the next
		vertex.
(parallelogram)	2	Click again, and drag the cursor until the
		parallelogram takes the shape you want.
	3	Click to finish.
	1	Click at a vertex, then move the cursor to the next
		vertex.
(polygon)	2	Repeat until the polygon takes the shape you want.
		For a polygon with n sides, click n-1additional times
		at the vertices. For example, to draw a 7-sided
		polygon, click at 6 vertices.
	3	At the last vertex before completing the shape,
		Right-click to complete the polygon.