3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 Configuring Wireless Parameters

244CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

If you have not planned RF coverage or configured any MAPs in the network plan yet, no radios are listed. You can add the radios later. (Select the radio profile, click Properties, then select Radio Selection. See “Configuring Advanced Radio Profile Settings” on page 265.)

dGo to step 15.

15Click Finish.

The service profile appears in the service profile table.

Configuring a Voice If the VoIP devices use Wi-Fi Multimedia, you do not need to configure a over Wireless Service service profile. WMM is supported automatically. A voice service profile is

required only for non-WMM devices.

1Access the Voice Service Profile wizard:

a In the Organizer panel, click on the plus sign next to the WX switch on which you want to configure the service profile.

b Click on the plus sign next to Wireless. c Select Wireless Services.

d In the Task List panel, select Voice Service Profile.

2Read the description of the wizard on the first page, then click Next.

3Edit the service name in the Name box.

Editing the name is optional if this is the first service of this type you are configuring on the switch.

4Type the SSID name in the SSID box.

5Select the SSID type from the SSID Type box:

„Encrypted—Traffic on the SSID is encrypted.

„Clear—Traffic on the SSID is unencrypted.

6Select the VoIP vendor from the Vendor drop-down list:

„SpectraLink—Non-WMM SVP devices

„Vocera—Non-WMM Vocera devices

„Avaya—Non-WMM Avaya devices

„Other—Non-WMM devices that are not SVP or Avaya phones.

7Click Next.