3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual Generating a Network Usage Report

Generating a Network Usage Report 393

„Session Statistics

„AP Statistics

(See “Using the Client Monitor View” on page 415 for information about the data columns in each section of the report.)

Generating a

Network Usage

Report

The network usage report lists network usage statistics.

The data for this report comes from 3WXM Services. The Enable RF trending option, located in the RF Monitor group box of the Monitoring Settings tab, must be enabled. (See “Changing Monitoring Settings” on page 500.)

1Select the Reports tool bar option.

2In the Report Category list, select RF Reports.

3In the Reports list, select Network Usage.

4Select the scope type of the report from the Report Scope Type drop-down list:

„Mobility Domain

„Wireless Switch

„Site

„Building

„Floor

„Coverage Area

5Select the instance for which you want the report. For example, if the scope is Building, select the building.

6Select the time period for the report:

„1 Hour

„24 Hours

„7 Days

„30 Days

7To select or change the output directory for the report, click Choose, navigate to the new directory, and click Select.