3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Viewing and Changing Port Settings

Viewing and Changing Port Settings 181

bSpecify the user glob in the Matching User Glob box. To match on all usernames, leave the wildcards (**) in the box. (For syntax information, see “Access Rules” on page 238.)

To use an existing rule, leave the rule in the list.

cClick Next.

dSelect the EAP type:

„EAP-MD5 Offload

„PEAP Offload

„Local EAP-TLS

„External RADIUS Server

If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other protocols, the EAP Sub-Protocol is None.

(For information, see “EAP Type (802.1X Only)” on page 239.)

eClick Next.

fSelect the authentication and accounting method.

(For information, see “AAA Methods (RADIUS Server Groups and the Local User Database)” on page 240.)

gClick Next.

hTo configure accounting, select Enabled, select the record type (Start-Stop or Stop-Only), then select a RADIUS server group or LOCAL for the accounting and click Add.

iClick Finish.

jClick Next.

6To use MAC authentication to control access to the port, create or select a MAC authentication rule. Otherwise, go to step 7.

If a MAC access rule for this port has already been configured, the rule appears in the list on this page. You can select the rule or create a new one.

To create a new rule: a Click Create.

b Specify the MAC address glob in the Matching MAC Glob box. To match on all MAC addresses, leave the wildcard (*) in the box. (For syntax information, see “Access Rules” on page 238.)