3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Service Profile Selection Tab, Radio Selection Tab

268CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

At the end of each power-backoff interval, radios that temporarily increased their power reduce it by 1 dBm. The power backoff continues in 1 dBm increments after each interval until the power returns to expected setting.

You can specify from 0 to 65535 seconds. The default is 10 seconds.

Service Profile Selection Tab

The Profile Selection tab lists the service profiles to which the radio profile is mapped. The radios managed by the radio profile provide wireless service for the service profiles’ SSIDs.

To map the radio profile to a service profile, select the service profile in the Available Service Profiles list. Click Add to move the profile name to the Current Service Profiles list.

To remove the mapping between the radio profile and a service profile, select the service profile in the Current Service Profiles list. Click Remove to move the profile name to the Available Service Profiles list.

Radio Selection Tab

The Radio Selection Tab lists the radios managed by the radio profile. A radio can be managed by only one radio profile.

To add a radio to the radio profile, select the radio in the Available

Members list. Click Add to move the radio to the Current Members list.

To remove a radio from the radio profile, select the radio in the Current Members list. Click Reset to Default to return the radio to the default radio profile.

If the Available Members list is empty, no MAPs have been configured for the switch yet. To configure MAPs, see “Configuring a Directly Connected MAP” on page 275 and “Creating a Distributed MAP” on page 273. After you configure the MAPs, return to this wizard page to apply the radio profile to radios.