Nikon COOLPIXS9 Charging the Battery, First Steps, Plug in the charger, Charge the battery

First Steps

First Steps

Charging the Battery

The camera uses a rechargeable Nikon EN-EL8 lithium-ion battery (supplied). Charge the battery before first use or when the battery is running low.

1 Plug in the charger.

Connect the power cable to the supplied MH-62 battery charger (1) and insert the wall plug into a power outlet (2). The CHARGE lamp will light to show that the charger is on (3).

2 Charge the battery.

Remove the terminal cover from the EN-EL8 and insert into the MH-62.

CHARGE lamp starts blinking when battery is inserted. Charging is com- plete when lamp stops blinking.

About two hours are required to charge a new or fully depleted battery.

CHARGE lamp	Description
Blinks	Battery charging.
On	Battery fully charged.
	Battery error. If ambient temperature is not 0 to 40 °C (32 to
Flickers	104 °F), wait until temperature is in this range before charg-
	ing. Otherwise unplug charger and remove battery immedi-
	ately and take both devices to retailer or Nikon-authorized
	service representative.

12