3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 manual Accounts

52CHAPTER 3: GETTING STARTED

Creating Provision or After creating an administrator account, you can create provision or Monitor Accounts monitor accounts. To create a provision or monitor account:

1Access the 3WXM Services Setup dialog box.

2To add a provision user account, click Add Provision Account. To add a monitor account, click Add Monitor Account. The Add Account dialog box appears.

3Type the name of a user account that has access to the system.

4Type a new password for the user (1 to 80 alphanumeric characters, with no spaces or tabs). The password is case-sensitive.

5Type the password again for verification, and then click OK.

6In the 3WXM Services Setup dialog box, click Save to save the changes.

7Click Close to close the dialog box.

Deleting 3WXM User To delete a 3WXM user account:

Accounts

1Access the 3WXM Services Setup dialog box.

2Select a user account from the Authorized Users list.

3Click Remove an Account. The account is deleted.

4In the 3WXM Services Setup dialog box, click Save to save the changes.

5Click Close to close the dialog box.

Disabling Access If you have enabled access control for 3WXM, you can disable access Control control. This allows all users who have successfully authenticated to the

system on which 3WXM is installed to run 3WXM.

If you disable access control, the permissions and account types are deleted from 3WXM. However, these deletions have no effect on the Windows user accounts themselves.

To disable access control:

1Access the 3WXM Services Setup dialog box.

2Click Allow all users. All 3WXM accounts that were created are deleted.

3In the 3WXM Services Setup dialog box, click Save to save the changes.

4Click Close to close the dialog box.