3Com WX4400 3CRWX440095A WX1200 manual Select Wireless Services, Modifying Encryption Settings

260CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

Modifying SSID You can create access rules for a service profile from within a service Encryption Settings profile wizard. You also can create or modify a service profile’s access

and Access Rules rules after creating the service profile.

1Display the Wireless Service Profiles table:

aIn the Organizer panel, click on the plus sign next to the WX switch on which the service profile is configured.

1Click on the plus sign next to Wireless.

1Select Wireless Services.

2Select the service profile in the table.

A set of tasks appears under Setup in the Task List panel.

3To configure encryption settings and access rules, select one of the following in the Task List panel and go to “Modifying Encryption Settings”.

„802.1X Access

„MAC Access (used for voice)

„Web Portal Access

„Open Access

To configure access rules only, select Access Rules and go to “Modifying

Access Rules” on page 262.

Modifying Encryption Settings

1Select the security modes you want the SSID to support. You can select one or more of the following:

„RSN (WPA2)

„WPA

„Static WEP

2Click Next.

3If you selected RSN or WPA, you can select whether to use dynamically generated keys, or static keys based on a passphrase.

„To use dynamically generated keys, leave the Pre-shared Key box blank.

„To use static keys, type a string from 8 to 63 characters long in the Pre-shared Key box and click Generate.

4Click Next.