3Com 3CRWX120695A WXR100, 3CRWXR10095A manual To adjust the scale, Floor Plan After Cropping

Importing or Drawing Floor Details 85

If you click Yes, all objects and paper space outside the area you selected are removed and the image is resized to fill the removed space.

Figure 1 on page 84 shows the same floor plan as Figure 2 (below) after cropping the paper space.

Figure 2 Floor Plan After Cropping

Adjusting the Scale of If you imported a DWG or DXF drawing, you might need to adjust the a Drawing scale of the drawing because the units used in these drawings might not

have a one-to-one correspondence to meters and feet. To adjust the scale of the drawing, you draw a line between two points of known distance and adjust the measurement.

To adjust the scale

1Display the floor plan in the Content panel.

2Click on the toolbar.

3Drag to create a line between two points. A dialog box appears.

4In the dialog box, type the actual distance between the two points.

5Click OK.