3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 Rule for Telnet or SSH Access

320CHAPTER 8: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

7To enable this accounting rule for the SSID, select Enabled.

By default, accounting rules you configure in 3WXM are disabled, which means 3WXM does not add the rules to the switch’s configuration.

8Select one of the following record options:

„Select Start-Stopto specify that records are sent at the start of a session and the end of a session.

„Select Stop-Onlyto specify that records are sent only at the end of a session.

9Select the accounting method(s) in the Available RADIUS Server Groups list and click Add.

The options and processing are the same as those for authentication methods. (See step 5.)

10Click Finish.

Creating an Access To create an access rule for Telnet or SSH access:

Rule for Telnet or SSH

Access

1Access the Create Admin User wizard:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to AAA.

d Select Admin Access Rules.

e In the Task List panel, select Admin Access.

2Type the userglob that is allowed to access the switch through Telnet or SSH.

3Click Next.

4If the authentication rule is disabled, select Enabled.

When a rule is disabled, 3WXM does not add it to the switch’s configuration.

5Select the authentication method(s) in the Available RADIUS Server Groups list and click Add.

An authentication method specifies where the switch will look for user information to authenticate users. You can select a RADIUS server group, LOCAL (the switch’s local user database), or both.