3Com 3CRWXR10095A manual Changing RF, Detection Settings, Select RF Detection, OUI List

282CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

Viewing and	This section contains procedures for configuring RF detection on an
Changing RF	individual switch. For an overview of RF detection and for specific
Detection Settings	information about the configuration options, see “Configuring Wireless
	Parameters” on page 235.
	The tasks available here allow you to configure entries for permit lists, the
	ignore list, and the black list. However, you must enter the SSID,
	Organizationally Unique Identifier (OUI), or MAC address you are adding
	to a list. To add a value to a list by selecting it, use the RF Detection
	window instead. (See “Detecting and Combatting Rogue Devices” on
	page 457.)
	To convert a rogue into a third-party AP, see “Converting a Rogue into a
	Third Party AP” on page 471.

Viewing RF Detection To view RF detection settings:

Settings

1Select the Configuration tool bar option.

2In the Organizer panel, click the plus sign next to the WX switch.

3Click the plus sign next to Wireless.

4Select RF Detection.

The RF detection settings appear in the Content panel.

Adding an Entry to To add an entry to the permitted vendor OUI list: the Permitted Vendor

OUI List

1Access the RF detection settings:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to Wireless.

d Select RF Detection.

2In the Task List panel, select Vendor OUIs.

3Select the device type(s):

„Client

„AP