3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual WX4400# set ip dns domain examplecorp.com

Staging a WX Switch for Configuration by 3WXM 339

Example 4: The deployment site in this example has a DHCP server, so the switch’s Deployment Site Has DHCP client is enabled. Static IP address and default gateway information DHCP But Local DNS are not required. The site also has a local DNS server. However, the local Domain Differs From DNS domain name is different from the corporate DNS domain name

Corporate DNS where 3WXM Services are located. The static DNS configuration on the Domain switch overrides the DNS configuration from the DHCP server.

1Configure a VLAN:

WX4400# set vlan 1 port 7 success: change accepted.

2Enable the DHCP client on VLAN 1:

WX4400# set interface 1 ip dhcp-client enable success: change accepted.

3Configure the default DNS domain name:

WX4400# set ip dns domain examplecorp.com

Domain name changed

4Configure DNS server information:

WX4400# set ip dns server 192.168.11.2

5Enable the MSS DNS client:

WX4400# set ip dns server enable success: change accepted.

6Enable the auto-config option:

WX4400# set auto-config enable success: change accepted.

7Create a self-signed administrative certificate, to enable 3WXM or Web Management to communicate with the WX.

WX4400# crypto generate key admin 1024 key pair generated

WX4400# crypto generate self-signed admin Country Name:

State Name:

Locality Name:

Organizational Name:

Organizational Unit:

Common Name: remoteswitch1@example.com

Email Address:

Unstructured Name:

success: self-signed cert for admin generated