3Com WX4400 3CRWX440095A WX1200 manual To schedule deployment of local changes, Nonmatching

Synchronizing Local and Network Changes 353

You can click Close at any time after clicking Deploy. The operation continues in the background. To review the status of the operation, use the operation log. (See “Viewing the Operation Log” on page 358.)

To schedule deployment of local changes

1Select the Devices tool bar option.

2At the bottom of the Task List panel, select Change Management.

3Select one or more WX switches.

To select multiple switches, press Shift (for contiguous switches) or Control (for noncontiguous switches) while clicking.

4In the Task List panel in the Local Changes group, click Schedule Deploy. The Schedule Deploy dialog box appears.

5Edit the start date and time.

(The date and time are based on the date and time on the machine where 3WXM Services is installed.)

6Click OK.

Synchronizing When If a WX switch in the network has configuration changes, and the the Network and switch’s counterpart in the network plan also has changes but the

3WXM Have changes are different, you still can synchronize the changes.

Nonmatching

Changes The Devices tab indicates that both the network and the network plan have nonmatching changes in the following ways:

„When you select the WX switch, the links in both the Local Changes and Network Changes groups of the Task List panel become active.

„When you click Deploy, the deployment is not performed and the following message is displayed instead: wx is not synchronized.

To synchronize the changes, do one of the following:

„Review and either deploy (local changes) or accept (network changes), then review and either deploy or accept the other set of changes.

„Reject one set of changes (local or network) and accept or deploy the other set of changes.

„Reject both sets of changes.