3Com 3CRWXR10095A, 3CRWX120695A WXR100, WX4400 3CRWX440095A WX1200 manual Session

Using the Client Monitor View 441

5The client is most likely in the vicinity of the area indicated by the red squares in the floor plan. The number in red on the legend (0.44 in this example) is the probability (44%) that the client is where the display indicates.

6The list of MAPs that detected the client is shown to the right of the floor display. To refresh the list of MAPs, click the Refresh Listeners button.

7To change the MAPs used for calculating the client’s location, select or deselect MAPs from the list and click the Locate button.

Terminating a Client’s To terminate a client’s session

Session

1Select the client.

2Click on the Client Monitor view’s toolbar. The Clear User dialog box appears.

3Do one of the following:

„Click Yes to terminate the session, then click Close.

„Click No to cancel the termination request.