3Com 3CRWX120695A WXR100, 3CRWXR10095A manual To immediately install an image on WX switches

Distributing System Images 355

Distributing System You can distribute a system image to one or more WX switches in a Images network plan.

To use a new system image, you must reboot the WX. For more information, see “Rebooting WX Switches or MAP Access Points” on page 356.

3Com recommends that you use the Verification tab to resolve any configuration errors or warnings before you distribute system images.

Before you can distribute an image, you must add it to the image repository. (See “Using the Image Repository” on page 354.)

To immediately install an image on WX switches

1Select the Devices tool bar option.

2At the bottom of the Task List panel, select Device Operations.

3In the Managed Devices list, select the WX switches onto which you want to install the image.

To select more than one WX, click Shift while clicking to select contiguous items, or click Ctrl while clicking to select noncontiguous items.

4In the Task List panel, select Image Install.

5Click on Select an Image to display the list of images in the repository.

6Select the image and click Install.

To schedule installation of an image on WX switches

1Select the Devices tool bar option.

2At the bottom of the Task List panel, select Device Operations.

3In the Managed Devices list, select the WX switches onto which you want to install the image.

To select more than one WX, click Shift while clicking to select contiguous items, or click Ctrl while clicking to select noncontiguous items.

4In the Task List panel, select Schedule Install.

5Click on Select an Image to display the list of images in the repository.

6Click Next.