3Com 3CRWXR10095A, 3CRWX120695A WXR100, WX4400 3CRWX440095A WX1200 manual Click Properties

216CHAPTER 6: CONFIGURING WX SYSTEM PARAMETERS

You cannot add MAP ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multicast traffic.

To add or remove static multicast router and receiver ports:

1Access the VLAN table:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to System.

d Select VLANs.

2In the Content panel, select the VLAN.

3Click Properties.

4Click the VLAN Member Details tab.

5To add a static multicast receiver port, select the Forward Multicast IP Out checkbox for each port you want to add.

By default, ports are not selected. To remove a static multicast receiver port, clear the checkbox.

6To add a multicast router port, select the Multicast Router Present checkbox for each port you want to add.

By default, ports are not selected. To remove a static multicast receiver port, clear the checkbox.

7Click OK.