3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual Adding or removing a layer

Importing or Drawing Floor Details 89

Adding or removing a layer

To add a new layer to a drawing, do the following:

1Right-click the list of layers in the Organizer panel.

2Select Add Layer from the menu that is displayed. 3WXM adds the new layer to the list and highlights its name so you can edit it.

3Edit the name.

Moving an object from one layer to another

To move an object from one drawing layer to another:

1In the drawing, select the object(s).

2Click on the toolbar. The Layer Assignment dialog box appears.

3Click the down arrow to display the list of layers in the drawing, and select the layer to which you want to move the object(s).

4Click OK.

Cleaning Up a 3WXM can simplify an imported CAD drawing by removing unnecessary Drawing objects from each layer. Drawing cleanup eliminates unneeded objects,

lines, and text.

Note the following when cleaning up a drawing:

„Drawing cleanup does not apply to GIF or JPEG drawings.

„Drawing cleanup does not change objects that are grouped.

„If two objects that would normally be cleaned (such as two parallel lines close together) exist on different layers, then neither object is removed.

You cannot remove a layer from a drawing using the procedure in this section. See “Adding or removing a layer” on page 89.