3Com WX4400 3CRWX440095A WX1200 manual „ To list disabled access points, select Show Disabled MAPs

152CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

4On the floor plan, click where you want the measurement point to be placed. The Create RF Measurement Point dialog box appears.

5In the Description box, type a description for the measurement point (1 to 60 characters).

6In the RSSI Options box, select display options for the dialog box:

„To list access points that cannot be detected from this RF measurement point, select Show Unreachable MAPs.

„To list disabled access points, select Show Disabled MAPs.

„To list access on other floors that can be detected from this RF measurement point, select Show MAPs on Other Floors.

See “Reading the RF Measurement Table” on page 153 for information about the fields in the display.