Configuring WX System Parameters | 3Com 3CRWX120695A WXR100 specs

208CHAPTER 6: CONFIGURING WX SYSTEM PARAMETERS

VLAN names must be globally unique across a Mobility Domain to ensure the intended user connectivity as determined through authentication and authorization.

Every VLAN on a WX has a VLAN name, used for authorization purposes, and a VLAN number. VLAN numbers can vary uniquely for each WX and are not related to 802.1Q tag values even when used.

3In the VLAN ID box, specify a VLAN number (2 to 4093). The VLAN number must be unique on a particular WX.

4Click Next.

5From the list of available members, select a port or port group (if you previously created port groups).

If a port or port group is currently a member of a VLAN, the VLAN name is listed in the VLAN(s) column. To make multiple selections, press Shift (for contiguous items) or Control (for noncontiguous items) while clicking items.

6Do one of the following:

To add a port or port group to the VLAN and remove previous VLAN membership, click Move.

Moving a port or port group could potentially affect multiple VLANs.

To add a port or port group to the VLAN and retain previous VLAN membership, click Add.

7Click Next.

8To add an IP interface to the VLAN, do one of the following:

Statically configure an address by editing the IP address and subnet mask (for example, 10.10.10.10/16).

Select DHCP Client to use a DHCP server to dynamically obtain an IP address for the VLAN.

Generally, VLANs are equivalent to IP subnets. If a WX is connected to the network by only one IP subnet, the WX must have at least one VLAN configured. Optionally, each VLAN can have its own IP address. However, no two IP addresses on the switch can belong to the same IP subnet.

MSS does not support assigning a switch’s system IP address to an address received through the DHCP client. 3Com recommends that you use the DHCP client only on WXR100 switches that you plan to configure using the drop-ship method.

9Select Interface Enabled to enable the IP interface.

10Click Finish.

Image 208

3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 manual Configuring WX System Parameters

Contents

Wireless LAN Mobility System WX4400 3CRWX440095A WX1200 3CRWX120695A WXR100 3CRWXR10095A 3Com Corporation 350 Campus Drive Marlborough, MA USA United States Government Legend Contents Getting Started Enabling Keyboard Shortcut Mnemonics Windows XP Only 125 Placing Third-Party Access Points 131 175 Launching a Web Management Session with the Switch 176 186 Configuring Snmp 187 Resetting CoS Mapping to their Default Values 233 241 Configuring an 802.1X Wireless Service 242 244247 258 299 Creating a Radius Server Group 300 316319 320 337 Example 3 Deployment Site Has DNS But No DhcpWX File Management Options Devices Tab 347 356 Enabling or Disabling Management of a Switch by 3WXMViewing the Operation Log 358 Applying Policy Changes to Switches 375 375394 Generating a Radio Details Report 395 Generating a Site Survey Order Generating a Work Order 410 Displaying 802.11 Coverage412 439 465 468 496 Register Your Product 507Page List conventions that are used throughout this guide ConventionsIcon Description Documentation Comments Pddtechpubscomments@3com.com Example Requirements for 3WXM client 3WXM Client Hardware RequirementsHardware Requirements for Running 3WXM Client Hardware Requirements for 3WXM Monitoring Service Hardware Requirements for Running 3WXM Monitoring ServiceHard drive space Available Monitor resolution Number Radios WX Switches 50+ WX Switches Installation SoftwarePreparing for User Privileges Installing 3WXM Installing 3WXM Installing 3WXM Click Uninstall Click Continue Overview Plan is displayed by the 3WXM client Display Panels Display Panels Alerts Alert Category Description Alerts Rogue Detection Saving or Discarding Configuration Changes Reviewing and Deploying Switch Configuration Changes Configuration Wizards Working with the 3WXM User Interface Resize Icons Properties DialogsOption Description 3WXM Menu Options Menu Option Description 3WXM Tool Bar Options Menu Option Description Configuration Verification Copying, Pasting DeletingObjects Organizer Panel Copy and Paste Content Panel Replace Organizer Panel Enabling Keyboard ShortcutMnemonics Windows XP Only Enabling Keyboard Shortcut Mnemonics Windows XP Only Working with the 3WXM User Interface Switch Manager 3WXM, restricting access to 3WXM, creating Following steps describe how to start 3WXMStarting 3WXM Managing network plans, and defining a Mobility Domain Next Starting 3WXM Getting Started Restricting Access to 3WXM Accounts Working with Network Plans Plan Creating a Network To create a network plan Plans 3WXM installation directory on the 3WXM Services hostCan also share a network plan with others Saving a Network Plan with a New Name Managing Network Plans Plan Managing Network Plans To disable notification Defining a Mobility Domain Traffic Ports Used for AAA Servers and Management Servers Protocol Port Function Creating a Creating a WX SwitchThird-Party AP Working with Network Plans Auto-Tuning Settings toChanging Country Code Uploading a WX Switch into Network Plan Click Next Click Finish Converting Auto DAPs into Statically Configured APs Affinities for Network Domain Seeds Affinity Value Assigned To RF Planning Toolbar icons available in RF Planning Tools RF Planning Overview Modifying a Site Creating orTo create or modify a site Creating or Modifying a Site Modifying Buildings in a Site Creating or Modifying Buildings in a Site Planning the 3COM Mobility System Modifying Floors Drawing Floor Importing orDetails To prepare a drawing before importing it into 3WXM Planning the 3COM Mobility System Importing or Drawing Floor Details Operating Tips Useful AutoCAD Operations and Naming-ConventionsCommon AutoCAD Layer Names Importing the Drawing To crop the paper space Floor Plan After Importing To adjust the scale Floor Plan After Cropping To adjust the origin point Origin point New location of origin point Hiding Layers Shows the same floor plan as after hiding unnecessary layers Adding or removing a layer Moving an object from one layer to another To clean up a drawing Importing or Drawing Floor Details Planning the 3COM Mobility System To draw an object Object Action Planning the 3COM Mobility System To create RF obstacles for all objects in a layer To create RF obstacles for an area in a drawing To use the Create RF Obstacle Dialog box To create RF obstacles by grouping objectsCreate RF Obstacle dialog box is shown in Figure Drawing RF Obstacles 3WXM supports concave polygons. a concave Specifying the RF Characteristics of a Floor Adding LOS Points Site Survey RecommendationsTo import LOS points from a file Specifying the RF Characteristics of a Floor Planning the 3COM Mobility System To create LOS points in 3WXM Click Next. The radio configuration page appears Specifying the RF Characteristics of a Floor To delete an LOS point To move an LOS pointGenerating a Site Survey Order Click Generate Importing RF Measurements Click Next Applying the RF Measurements to the Floor Plan To create a wiring closet Planning the 3COM Mobility System Shared Coverage Areas Shows an example of shared coverage areas Drawing a Coverage Area Unsupported Shared Coverage Area Example Object Action Specifying the Wireless Technology for a Coverage Area Specifying Coverage Area Properties Click Next. The Floor Properties page appears Specifying Floor Properties for the Coverage Area Specifying Default Device Settings for the Coverage Area Planning the 3COM Mobility System WX4400 switches support indirect MAP connections only Configuring Capacity Calculation for Data Configuring Capacity Calculation for Voice Planning the 3COM Mobility System Areas Planning the 3COM Mobility System Defining Wireless Coverage Areas Planning the 3COM Mobility System Defining Wireless Coverage Areas Planning the 3COM Mobility System Creating and Placing An Icon for a Third-Party Access Point AP Icon to its FloorLocation Place tab Planning the 3COM Mobility System Placing Third-Party Access Points Planning the 3COM Mobility System Placing Installed Auto-ConfiguredMAPs Plan Planning the 3COM Mobility System To specify design constraints WX4400 switches support indirect MAP connections only Computing MAP Placement To compute and place MAPs Go to To review coverage area computation To review coverage area computation Planning the 3COM Mobility System Locking and Unlocking MAPs To lock a MAP To assign channels Channel Assignment to Minimize Co-Channel Interference Computing MAP Placement Planning the 3COM Mobility System To compute optimal power Planning the 3COM Mobility System To resolve optimal power computation problems Verifying the Wireless Network Resolving coverage gaps To place an RF measurement point „ To list disabled access points, select Show Disabled MAPs Signal strengths for any location on the floor To use the RF interactive measurement mode RF Measurement Information Shows the information available in the RF measurement tableValue Generating RF Network DesignInformation To generate a work order report Click Generate Work Order WX Switch Configuration Objects Parameters WX Switch Object Types Category Object Type Description WX Switch Object Types AAA Adding a WX Switch to the Network Plan Creating a WX Switch Using the Create Wireless Switch Wizard Configured Switch Network Plan Click Management Interface Configuration File Click WX Associations Configuring Basic SettingsAdvanced Reviewing Using the Create Wireless Switch Wizard Password is encrypted when you type it Click Next Configuring WX System Parameters To set up a switch „ V2c Setting Up a Switch „ 11b „ 11g Modifying Basic Switch Parameters Changing the WX To change the WX software version Software VersionModel Select the model from the drop-down list Click OK Information To convert an Auto DAP To delete an Auto DAP Viewing Port Settings Viewing Changing Port SettingsSettings Enabling Link Notifications Click Properties Select Snmp Link Traps Click Next Configuring WX System Parameters Viewing and Changing Port Settings Configuring WX System Parameters Viewing and Changing Port Settings Viewing Port Groups To view port groups Select Port Groups Content panel, select the row for the port group Creating a Port Group To create a port groupGroup Click Properties 3WXM, Https is always enabled and listens on port Management Service SettingsSelect Management Services Viewing Viewing and Changing Management Settings Configuring an Snmp V1 or V2c Community String Task List panel, select Community Configuring a USM Snmp V3 User Configuring WX System Parameters Configuring a Notification Profile Configuring a Notification Target Click Properties Community string names are transmitted in clear text Configuring WX System Parameters Select the object you want to modify Configuring 3WXM Services as a Notification TargetTask List panel, select 3WXM Notification Target Community string names are transmitted in clear text Click Finish Trace Settings Setting LogViewing Log Settings To view log settings Configure logging to the console Creating an External Log Server Creating a Trace Area Configuring IP Services SettingsSetting Static routes Select IP Services You cannot use the word all as the name of an IP alias Select IP Services Select IP Services Configuring VLANs Users and VLANs Roaming and VLANs Viewing VLANs To view VLANs Configuring WX System Parameters Viewing and Configuring VLANs To tag a port or port group, select the Tag checkbox Changing STP Port Settings in a Vlan Click OK Enabling STP Fast Convergence Features Configuring WX System Parameters Configuring Static Multicast Ports Click Properties Viewing and Configuring VLANs Restricting Layer A Vlan Select Dhcp Server to enable it on the Vlan Server that stores confidential salary information Configuring ACLsLast ACE of an ACL Viewing ACLs To view ACLs To configure an ACL IP Protocol Number Configuring WX System Parameters „ 0 normal-Packets with normal TOS defined are filtered To enable the hit counter for an ACE Configuring Advanced ACL SettingsTo change the hit sample rate To enable the established option for TCP ACEs To specify the type and code for Icmp ACEsIcmp Messages and Codes Icmp Message Type Number Code Number Adding a New ACE to a Configured ACL Viewing and Configuring ACLs Individual ACE from an ACL Mappings Changing CoSMappings Mapping Setting a Range Dscp Values to a Configuring WX System Parameters Viewing Configuring Wireless Services Service Profiles Service Profile Parameters Service Profile Parameters Access Rules Service Profile Type Access Rule Type Default Access Glob Viewing and Configuring Wireless Services „ Local EAP-TLS-EAP with TLS Services Viewing Wireless To view wireless servicesSelect Wireless Services „ WPA Select the EAP type Configuring Wireless Parameters „ WPA Configuring Wireless Parameters Web-Portal WebAAA Service „ Static WEP Click Next Viewing and Configuring Wireless Services Access Service „ WPA Go to step Click Finish Service Profile Tab WPA, RSN Tab Broadcast Settings Tab Authorization Attributes TabStatic WEP Tab Voice Configuration Tab Radio Profile Selection Tab Client Timeout tab lists settings for client session timers Client Timeout TabRate Configuration Tab Viewing and Configuring Wireless Services Soda Tab Click Properties Modifying Encryption Settings Viewing and Configuring Wireless Services Modifying Access Rules Profiles Configuring RadioSelect Radio Profiles Creating a Radio To create a radio profile Profile Click Reset To Default Radio Profile Tab Attributes Tab Auto Tune Tab Service Profile Selection Tab Radio Selection Tab Profile Settings Auto-DAP Profile Profile Settings Viewing and Changing the Auto-DAP Profile Configuring MAPs DAPs into Statically Configured DAPs Deleting Auto DAPsThrough radio signals See Deleting Auto DAPs on Viewing the To view the configured MAPs Configured MAPsSelect Access Points Maximum MAPs Supported Per Switch „ 112233445566778899aabbccddeeff00 Transmit Power box, specify the transmit power for the radio To configure a directly connected MAP Channel Number list, select the channel number for the radio Click the plus sign next to Wireless Transmit Power box, specify the transmit power for the radio Configuring Wireless Parameters Configured Viewing Radio To view radio settingsChanging Radio Select Radios Detection Settings Changing RFSelect RF Detection OUI List List Edit the MAC address in the MAC Address box Click OK Countermeasures Select RF Detection Select Enable AP Signature Configuring Wireless Parameters Creating Managing UsersLocal User Database You can create two types of users in the local database Groups in the Local Database User Creating a Named To create a named userSelect Local User Database Group and Assigning Users To It Creating and Managing Users in the Local User Database Task List panel, select MAC User Group Encryption-type Authentication Attributes for Local UsersEnd-date Filter-id Idle-timeoutMobility-profile Session-timeout Service-typeSsid Start-date Start-date , end-date , or both Time-of-day Time-of-day tu1000-1600,th1000-1600 Time-of-day wk0900-1700,sa2200 Radius Settings GroupA 3Com Mobility System Url Server Settings, Servers, Server GroupsSelect Radius Click Next Viewing and Configuring Radius Settings To change default values for Radius parameters Configuring Global 802.1X Settings802.1X Settings Select Attempts Click Save Network Access Network Access RulesSelect 802.1X Access Rules Rules Viewing and Configuring 802.1X Network Access Rules „ Local EAP-TLS-EAP with TLS Viewing and Configuring 802.1X Network Access Rules Network Access Rule Configuring MACSelect MAC Access Rules Viewing and Configuring MAC Network Access Rules Page Viewing Configuring WebAAA Network Access Rules Viewing Web AAA To view Web AAA network access rules Creating a Web AAA To create a Web AAA network access rule Viewing and Configuring WebAAA Network Access Rules Select Last Resort Access Rules Viewing Configuring Last-Resort Network Access RulesTask List panel, select Last Resort Network Access Viewing and Configuring Last-Resort Network Access Rules Configuring WX AdministratorAdministrator Access Rules Select Admin Access Rules Rule for Console Access Rule for Telnet or SSH Access Viewing and Configuring WX Administrator Access Rules Support for Configuring AAAUsers Viewing and Configuring AAA Support for Third-Party AP Users Proxy for a Client Port Connected to Third-Party AP Changing Location Policy RulesPolicy Rules Select Location Policy Creating a Location To create a location policy rule Policy Rule Viewing and Changing Location Policy Rules Profiles Changing MobilitySelect Mobility Profiles Viewing and Changing Mobility Profiles Page Remotely How Remote WX Configuration Works Drop Ship WXR100 Only Shows the location of the Fn switch and the LED Staged WX „ The network plan containing the WX switches must be open „ 3WXM must be installed and 3WXM Services must be running3WXM Requirements Configuration by Switch forStaging a WX Enable the auto-config option Save the configuration changesPower off or restart the switch Configure an IP interface on the Vlan Configure DNS server information Enable the MSS DNS client WX4400# set ip dns domain examplecorp.com WX4400# save config Configuration with Configured SwitchCompleting its Replacing a Switch Reusing itsReplaced switch’s configuration At the remote office How Switch Replacement Works ReplacementTo enable replacement of remote switches Enabling To replace a switch WX File Document where the options are describedOptions Devices Tab Switches in the network planWX File Management Options in 3WXM Devices Tasks Task Option Description Group Task Task Option Group Description Task Task Option Group Configuration Changes Synchronizing LocalNetwork Changes Undoing Local or To undo local or network changes Network Changes To immediately deploy local changes Nonmatching To schedule deployment of local changesTo synchronize the changes, do one of the following To add a system image Repository. Images are storedTo delete a system image To immediately install an image on WX switches To schedule installation of an image on WX switches Rebooting WX Switches or MAP Access Points You can use 3WXM to reboot WX switches and MAPsTo reboot WX switches and the MAPs they are managing To reboot MAPs without rebooting the switch Switch by 3WXM Enabling orDisabling Management of a Canceling a Operation LogScheduled Operation To display the operation log Importing Exporting Switch Configuration Files To import a configuration To export a configuration To modify configuration polling options ModifyingChange Polling Alerts panel Managing WX System Images and Configurations Changes Toolbar Options on Verification Tab To disable a specific instance of a warning or error To resolve an error or warningSelect the warning or error message To globally disable a warning or error To change verification options To disable or reenable a rule Or for specific instances Verifying Configuration Changes „ 802.1X-EAP certificate for a WX switch „ WebAAA certificate for a WX switchWhen 3WXM connects to 3WXM Services or a WX switch, Distributing PKS #12 files Certificates ProcessingTo process a certificate Managing Certificate that is stored in the 3WXM certificate storeTo review certificate details Select Tools Certificate Management Switches Or more WX switchesDistributing Certificates to WX Policies Access the Create Policy wizard Viewing PoliciesCreating a Policy To view policies Changes to Switches Feature Settings PolicyApplying Policy Feature Categories For This Feature Area See System FeaturesWireless Features AAA Features Event Log DisplayingToolbar Options Refreshing Event DataReviewing Event Filtering Event To filter messages by content Using the Event LOG Severity To export filtered data Generating Reports Configuration reports Mobility Domain ConfigurationWX Configuration Client Errors Generating an Inventory ReportTo generate an inventory report Inventory Report Sections Mobility Domain Generating aReport Configuration Report WX Configuration Report Sections Summary Report Details Report Click Generate Errors Report „ Session Properties „ Location History Generating a Network Usage Report Network usage report lists network usage statistics Summary Report Scope is always MAP Radio and cannot be changed Details Report Generating a Rogue Summary Report Click Generate Select the language „ English „ German Click View Work Order Switches and shows information based on those traps 3WXM Services regularly checks the status of the networkStatistics and the event log Accessing To access monitored dataRequirements for Monitoring Using the Explore Window Monitoring the Network Toolbar Options in Link Display of Explore View „ Green UpIconDescription Lists the options on the toolbar in the floor display Toolbar Options in Floor Display of Explore View Toolbar Options in Floor Display of Explore View Monitoring the Network Using the Explore Window Monitoring the Network Coverage Display Options in Explore Window Display Option 3Com radio on the floor To take an RF measurement Rssi measurements RF measurement point Using the Status Immediately updated for the new measurement pointSummary View Click on the new measurement point. The measurement data is Using the Client Monitor ViewOn the network Toolbar Options in Client Monitor View Data Displayed When a Mobility Domain or Site is Selected That you can double-click on the arrow to change Number of times authentication for a client failed Data Displayed When a Switch, MAP, or Radio is Selected Client Activity Columns When a Mobility Domain is Selected Ssid Activity Details for Authentication Failure Activity Details for Association Failure Activity Details for Authorization Failure Peap Activity Details for Authorization Successful ColumnDescription Have been collected and will be transmitted to the new Activity Details for Client Cleared Activity Details for Disassociation Activity Details for Dot1x Failure Data Displayed When a Mobility Domain is Selected Activity Details for Roam Data Displayed When a WX Switch, MAP, or Radio is Selected Client Sessions Columns When a Mobility Domain is Selected Displaying Session Details SNR Session Properties Columns „ Updatedtoroam User is roaming. Session Session Statistics Columns Session Statistics Columns Adding a Client to the Watch List Clients on the watch list by MAC addressLocation History Columns Using the Client Monitor View „ natasha@example.com Click Next. The search results appear Displaying the Client Watch List Details are displayed on the following tabs Geographical Location On the floor To display a client’s session Monitoring the Network Session Using the RF Window Displaying RFRF Monitor RF Neighborhood Columns Window Bssid RF Monitor Activity Log Columns Statistics RF Monitor Environment Columns RF Monitor Environment Columns RF Trends Columns Can indicate interference from a non-802.11 device To access performance statistics from the network Statistics Monitoring the Network Accessing Realtime Performance Statistics „ Octets In/Out „ Packets In/Out „ Errors In/Out Viewing Current Data Viewing Historical Data Viewing Data in Percentages Exporting Performance Data To export data to a file Monitoring the Network Rogues Converting a rogue into a third party APThat truly are rogues Rogue Detection Requirements Snmp Notifications for RF DetectionNotification Type Description Rogue detection notifications IDS/DoS notifications Snmp Notifications for RF Detection Detecting and Combatting Rogue Devices Rogue Detection Lists Detection Screen Using the RogueMain 3WXM tool bar Toolbar Options on Rogue Detection Screen To filter the rogue list Current, Current Hour, Current Day, and History Tabs Listeners Tab Activity Log TabActivity Log Columns Clients Tab Lists the information displayed on the Clients tabListeners Columns Client Columns Displaying a Rogue’sGeographical Location Displaying a Rogue’s Geographical Location To add a device to the ignore list Adding a Device to Attack ListConverting a Rogue Into a Third Party To display the list To remove a third-party AP Configuring RF Adding a Rogue’sClients to the Black List Detecting and Combatting Rogue Devices Importing RF MeasurementsRF obstacle data Importing the To import the measurements Optimizing a Network Plan Measurements to Floor Plan Locating and Fixing Coverage HolesCoverage holes by displaying coverage Locating a Coverage To locate a coverage hole Locating and Fixing Coverage Holes Installed to Network Plan Preferences Values ResettingTools Preferences Changing Network SynchronizationChanging User Interface Options To change network options Within Window Style, select one of the following Changing Tools CertificateCheck on Click the Certificate Handling tab Typical Client’s Transmit Power Changing OptionsFor RF Planning You can change the following RF planning options To Change a Color Defining a Color from the Palette Defining a Color by Changing HSB Properties Defining a Color by Changing RGB Properties Changing 3WXM Logging Options Chapter a Changing 3WXM Preferences Preferences Chapter B Changing 3WXM Services Preferences 3WXM Services ServicesStarting or Stopping To connect to 3WXM Services Connecting to 3WXM ServicesStart 3WXM client Verify that the service is running on the server Data To complete the connection Information, and access control to 3WXM Services Changing ServiceTo change service settings WX connection settings control the timeout and retries for Service will accept from the WX switchesClick the WXs Connection Settings tab Changing WX Changing WX Connection Settings Sources of Monitor Data Click the Monitoring Settings tab Polling Interval is 5 minutes and cannot be changed Https//ip-addr Managing Network Plans Chapter B Changing 3WXM Services Preferences Backup Chapter B Changing 3WXM Services Preferences Services Register YourProduct Purchase Access Software TroubleshootOnline Downloads Contact Us Latin America Telephone Technical Support and Repair Country Telephone NumberUS and Canada Telephone Technical Support and Repair Index Numbers Index Monitors WX switch performance Saving SSH Index Index