3Com 3CRWX120695A WXR100, 3CRWXR10095A, WX4400 3CRWX440095A WX1200 manual Session Properties Columns

430CHAPTER 16: MONITORING THE NETWORK

Table 50 Session Properties Columns

Column	Description
Username	Username the client used to log on to the network.
MAC Address	MAC address of the client.
Start Time	Date and time when the session began. The date and time
	are based on the system date and time of the WX switch
	with which the client is associated.
SSID	SSID with which the client is associated.
EAP Type	Extensible Authentication Protocol (EAP) used for
	authentication:
	„ PEAP — Protected Extensible Authentication Protocol
	„ MD5 — Message-digest algorithm 5
	„ TLS — Transport Layer Security protocol
	„ Pass-Through— The switch established an EAP
		session directly between the client and the RADIUS
		server. All authentication information and certificate
		exchanges between the client and RADIUS server
		passed through the switch.
	„ None — EAP was not used to authenticate this client.
	None is the EAP type when MAC authentication,
	last-resort authentication, or WebAAA is used to
	authenticate the client.
IP Address	IP address of the client.
VLAN Name	VLAN onto which the WX switch placed the user. This is
	the VLAN for which the user was authorized by the
	RADIUS server or the WX switch.
Authentication Server	System IP address of the WX switch that was attempting
	to authenticate the client.
	Note — The system IP address is listed even if the switch
	was using a RADIUS server to authenticate the client.
Access Type	Authentication type that granted access:
	„	DOT1X
	„	MAC
	„	LAST-RESORT
	„	WEB