470 CHAPTER 17: DETECTING AND COMBATTING ROGUE DEVICES
Ignoring Friendly Third-Party Devices
By default, when countermeasures are enabled, MSS considers any
third-party transmitter to be a rogue device and can send
countermeasures to prevent clients from using that device. To prevent
MSS from sending countermeasures against a friendly device, add the
device to the ignore list.
Each WX switch has its own ignore list. You can add an address to the
ignore list of one or multiple switches.
To add a device to the ignore list
1In the Filtered List of rogues on the Rogue Detection tab, select the
devices you want to add to the ignore list.
2Click on the toolbar. The Select Devices to Create Ignore List dialog is
displayed.
3If the switch(es) on which you are configuring the ignore list are in a
Mobility Domain, select the Mobility Domain. Otherwise, select None.
4Click Next to select to select all the switches that are listed, or click Next
to individual switches to select them.
5Click OK. The devices are added to the ignore list and disappear from the
Filtered List of rogues.